PROCESS CONTROL AND LOOP

PROCESS CONTROL AND LOOP
Yogyakarta | 26 – 29 Oktober 2015 | Rp 75.950.000/person
Yogyakarta | 24 – 27 November 2015 | Rp 7.950.000/person
Yogyakarta | 01 – 04 Desember 2015 | Rp 7.950.000/person

TUJUAN :

Setelah selesai mengikuti kursus ini, peserta diharapkan akan mengerti dan memahami proses kontrol peralatan dan konsep aktualnya serta faktor yang menyertai seperti setting up, maintaining, tuning dan troubleshooting pada bermacam control system. Memahami control loops dengan mempelajari batasan dan kemampuan peralatan, pengembangan produksi, efesiensi, keamanan dan kualitas produk.

 

CAKUPAN MATERI TRAINING:

1. Process and Instrument diagrams (P&ID’s).
2. Components of feedback control loop.
3. Effects of sensors.
4. Effects of control actuators.
5. Process dynamics.
6. Control valves (types, charactheristic, Cv sizing).
7. Valve actuators (types, fail modes, dead band).
8. Pulse control modulation.
9. Variable speed motor controls (DC and AC).
10. On/Off control action.
11. Multi-point control action.
12. Analog (continuos) control.
13. Proportional / gain action (units, direct / reverse control)
14. Integral / reset action (units, windup)
15. Derivative / rate action (units, problems)
16. Application of different control modes (P, PI, PD, PID)
17. Desired control responses (QDR, etc)
18. Control loop tuning methods.
19. Intelligent controllers (adaptive tuning, auto tune, fuzzy logic)
20. Typical controller features, option and capabilities.
21. Advanced control strategies (ratio, cescade, feed-forward)
22. Common problems in process control systems.
23. Troubleshooting process control systems.

 

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI?:

1. SLTA / D3 dengan pengalaman kerja 3 tahun sebagai Teknisi, Operator listrik, karyawan maintenance dan supervisors yang familiar atau pernah mempelajari tentang “instrumentation system”.
2. Semua pihak yang ingin memahami topik ini

INSTRUCTOR : 

Tugino, ST.,MT. dan Tim

Tugino,ST.,MT. was graduated from electrical engineering Universitas Gadjah Mada,UGM Yogyakarta. He is lecturer at electrical engineering STTNAS Yogyakarta, for some subjects such as robotics, control engineering, Programmable Logic Controller(PLC), computer network, instrumentation and measurement, electric installation. And also as lecturer at mechanical engineering UJB Yogyakarta for subject electrical power engineering. Mr. Tugino,ST.,MT.  is active training instructor, he has been delivering industrial training class to many companies in Indonesia for some subjects such as: Electrical Safety, DCS Operation and Maintenance, Genset Operation and Maintenance, Logic Control for Industry, Fundamental of Electrical, Advanced Process Control, PLC  SIEMEN  S7, Basic Telecommunication PABX, Audit Energi Listrik, Electrical Instalation in Hazardus Area, Low and Medium Voltage Switchgear, Cable  Fault Location  for  Testing of  Underground Power Cable, Protection of Electrical Power System, Building Maintenance Management, Generator and Excitation Operation and Maintenance, Lighning Protection and Grounding System, Basic Instrumentation and Control, Power Distribution System Protection, PLC Programmable Logic Controller using Siemen, Electrical & Mechanical Safety, Work at Height Scaffolding Safety, SCADA (Supervisory Control and Data Accuisition), Motor Maintenance and control, Control Valve and Instrumentation, And many others. Many companies has been becoming as participants in his training class such as:  Chevron Indonesia Company, PT Indocemen Cirebon dan PT Pertamina Limau, PT OCI Melamin Kaltim, PT total E&P Kaltim, PT Kodeko Pertamina, Indocemen  Kalsel  dan  PT  Pupuk  Kujang,  PT Petrokimia Gresik,  CNOOC SES  Ltd, ,PT Chevron Geothermal Drajat, PT MAK Kalasan dan  PT Pertamina Prabumulih, PT Kaltim Industrial Estate, PT Star Energy Bandung , PT Pertamina (Kedeco) Gresik, PT Telkom Bandung, PT Margaria Group Yogya, PT Nusa Halmahera Mineral, PT Tambang Bukit Asam, PT Star Energy Bandung, Politeknik Aceh, PT KPI Kaltim, PT Medco Palembang, PT Pertamina Cirebon ,PT Timah Bangka, PT PJB Bali, Refinery Cilegon,PT Chevron Duri dan Drajat , PT PKT Kaltim,PT INALUM Medan, PT Petrokimia Gresik, PT PJB PLN Gresik, PT Chevron Drajat, PT Pertamina Jawa Timur ,PT Semen gresik &   PT YTL Jatim, PT  Sari Husada Yogyakarta,  PT Pupuk Kujang, Iros PTD Irak,PT Petrochina Jambi, PT PJB Gresik, PT Kaltim Prima Coal, PT Semen Hocim Cilacap, PT Badak LNG Kaltim , PT. YTL Paiton Jawatimur,PT  Star  Energy Bandung, Medco Sumatra, PT Sriboga Semarang,PT PLN UJB Cirata, PT Indonesia Power Semarang, PT Indonesia Power Grati, PT Indonesia Power Semarang, PT DSM Kaltim, PT. Pertamina Learning Center, PT. PUSRI Palembang, PT. VICO Indonesia Kaltim, PT Kaltim Pasific Amoniak , UDIKLAT/PUSDIKLAT PLN (Medan, Palembang, Jakarta, Semarang, Surabaya, Makasar),  PT  Chevron  salak  dan  PT   Indonesia   Power semarang,   PT. IPMOMI Paiton, PT Chevron Garut, PTP,  PT PetroChina Sorong, , PT PERTAMINA Aceh, PT Pertamina Cilacap,  PT PERTAMINA Dumai, PT AZET Surya Lestari, PT Panca Manunggal Semarang, PG Jatiroto Lumajang Jatim and others.

VENUE

Yogyakarta (Jogjakarta plaza hotel/Ibis hotel yogyakarta/Ibis Styles yogyakarta hotel/Mutiara hotel/ Melia Purosani hotel)

TRAINING DURATION :

4 hari

 

 

TRAINING TIME 
10. 26 Oct 2015-29 Oct 2015
11. 24 Nov 2015-27 Nov 2015
12. 01 Dec 2015-04 Dec 2015

 

INVESTATION PRICE/PERSON :

1. Rp 7.950.000/person (full fare)  or
2. Rp 7.750.000/person (early bird, payment 1 week before training)  or
3. Rp 7.500.000/person (if there are 3 or more participants from the same company)

 

 

FACILITIES FOR PARTICIPANTS :

1. Modul Training
2. Flashdisk Training berisi materi training
3. Sertifikat
4. ATK: NoteBook dan Ballpoint
5. T-Shirt
6. Ransel
7. Foto Training
8. Ruang Training dengan fasilitas Full AC dan multimedia
9. Makan siang dan 2 kali coffeebreak
10.  Instruktur yang Qualified
11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me

 

cforms contact form by delicious:days