By October 17, 2018 0 Comments Read More →

AC/ DC ELECTRICAL MOTOR DRIVES – Pasti Jalan

AC/ DC ELECTRICAL MOTOR DRIVES

Yogyakarta | 24 – 26 Oktober 2018 | Rp 6.000.000,- /participant – PASTI JALAN
Yogyakarta | 13 – 15 November 2018 | Rp 6.000.000,- /participant
Yogyakarta | 18 – 20 Desember 2018 | Rp 6.000.000,- /participant

 

 

ELECTRICAL MOTOR DRIVES TRAINING OVERVIEW

This course covers AC/DC electrical motor drives for speed/position control.  It presents an integrated discussion of AC/DC electric motor, power electronics, and control systems. Applications of electric drives can be found in industries, electric transportation, robotics, process control and energy conservation. This course gives a thorough understanding of AC/DC electrical motor’s working, control , protection, maintenance, failure modes and the tools to maintain and troubleshoot AC/DC electrical motors drives. The course focuses on the dc and ac motor from solid state converters for better torque and speed response. Advanced control techniques are applied to optimize the performance of dc/ac motor drives. Since majority of modern drives are dc/ac motor drives, the course centers around the control of dc/ac motor drives. Participant will gain a fundamental understanding of the  AC/DC electrical motor drives, installation, operation and troubleshooting. Participant will gain valuable insight into the selection of the protection necessary to ensure your motors are protected against fault conditions, so as to ensure reliability and long life.  Finally, control aspects of some special motors, such as permanent magnet synchronous motor, brushless dc motor, switched reluctance motor, etc. Computer simulations are used for understanding AC/DC electric motor, power-electronics based converters and the design of control systems.

 

ELECTRICAL MOTOR DRIVES TRAINING OBJECTIVES

After successfully completing this course, Participants will able to do the following:

  • Understand the AC/DC electrical motor drives basic principles
  • Describe the Electric Drive systems and various applications such as flexible production systems, industries, transportation, robotics and process control
  • Understand the principle on AC/DC electrical motor
  • Understand the basic principles of power electronics in drives using switch-mode converters and pulse width modulation
  • Design torque, speed, and position controllers of motor drives
  • Explain operating principles, major components and control logic used with AC and DC drive speed controls
  • Learn the stepper motors and switched-reluctance motor drives
  • Get an appreciation of power quality issues in powering electric drives
  • Compare the advantages and disadvantages of AC DC drives based on application
  • Discuss the advantages of using variable speed drives in constant torque and variable horsepower loads
  • Understand the Troubleshoot of AC/DC electrical motor drives

 

ELECTRICAL MOTOR DRIVES TRAINING CONTENTS

  1. Introduction to AC/DC electrical motor drives.
  2. Basic principles of electro-mechanical energy conversion (Efficiency, torque, inertia, horsepower/power factor, Torque-speed curves)
  3. Principles of AC electrical motor (operating system and control)
  4. Principles of DC electrical motor (operating system and control)
  5. Basic understanding of switch-mode power electronic converters in electric drives
  6. DC-motor drives and electronically-commutated motor drives
  7. DC motor drives  (Speed-torque characteristics DC shunt,  series, Speed and position control methods)
  8. Designing feedback controllers for motor drives
  9. Introduction to AC machines (Induction-synchronous motors)
  10. Induction-motor drives: speed control
  11. Vector control of induction-motor drives
  12. Reluctance drives: stepper-motor and switched-reluctance drives
  13. Energy efficiency of electric drives and inverter-motor interactions
  14. Powering electric drives: power quality issues
  15. Ancillary issues in drives: sensors and controllers
  16. Converters and control (Phase controlled converters, Four quadrant operation Choppers,  AC to DC converters)
  17. Inverters and PWM techniques
  18. Voltage source inverters, current source inverters and PWM techniques
  19. Power Quality issue: Harmonic elimination
  20. Advance induction motor control (constant flux speed control ,vector control)
  21. Troubleshoot AC/DC electrical motor drives

 

WHO SHOULD ATTEND:

This training is recommended to be followed by :

  • Industrial, Commercial, Institutional Electrical Engineering & Maintenance Technicians
  • Electric Motor Operations staff
  • Other electrical personnel involved in the operation & control of electric motors

 

ELECTRICAL MOTOR DRIVES TRAINING METHODS

  • Lecturing
  • Discussion/Sharing
  • Case Study
  • Simulation
  • Evaluation

 

ELECTRICAL MOTOR DRIVES TRAINING INSTRUCTOR

  • Miftakhul Hudha, S.T., M.Eng.Sc.
  • Syafriyudin, S.T., M.T.

 

TIME & VANUE

  • Batch 10 : October 24 – 26, 2018 (running on schedule at Yogyakarta)
  • Batch 11 : November 13 – 15, 2018
  • Batch 12 : December 18 – 20, 2018
  • 08.00 am – 16.00 pm
  • Yogyakarta: Cavinton Hotel Yogyakarta ; Neo Malioboro Hotel Yogyakarta ; Ibis Styles Yogyakarta Hotel
  • Surabaya: Hotel Neo Gubeng Surabaya ; Hotel Santika Pandegiling Surabaya
  • Malang: Ibis Styles Malang Hotel
  • Jakarta: Yello Hotel Manggarai Jakarta ; Dreamtel Jakarta Hotel
  • Bandung: Serela Cihampelas Hotel Bandung ; Serela Merdeka Hotel Bandung
  • Bali: Ibis Bali Kuta Hotel ; Harris Kuta Raya Hotel Bali

In House Training : Depend on request

 

Biaya Pelatihan Perencanaan Dalam Tambang Terbuka

Yogyakarta:

  • Publish Rate              : Rp 6.000.000,- /participant
  • Special Rate       : Rp 5.500.000,- /participant (min 3 participants from the same company)

Bandung / Jakarta / Surabaya / Malang: Rp 7.000.000,- /participant

Bali: Rp 8.000.000,- /participant

 

Fasilitas Pelatihan Perencanaan Dalam Tambang Terbuka

INCLUDE:

  • Meeting Room at hotel, Coffe Break, Lunch
  • Module (hard & soft copy/flashdish)
  • Training Kit, Souvenir, Sertifikat
  • Airport pick up services
  • Transportation during training

EXCLUDE:

  • Penginapan peserta training
  • Pajak (Ppn 10 %)

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
 

cforms contact form by delicious:days

About the Author:

Post a Comment