By September 2, 2019 0 Comments Read More →

MAGNETIC PARTICLE TESTING (NDT LEVEL II)

MAGNETIC PARTICLE TESTING (NDT LEVEL II)

Bandung | 09 – 13 September 2019 | Rp 11.500.000/ person
Bandung | 28 Oktober – 01 November 2019 | Rp 11.500.000/ person
Bandung | 11 – 15 November 2019 | Rp 11.500.000/ person
Bandung | 02 – 06 Desember 2019 | Rp 11.500.000/ person

 

 

TRAINING MATERIAL OUTLINE MAGNETIC PARTICLE TESTING (NDT LEVEL II)

  1. Principles of Magnets and Magnetic Fields
    • Theory of magnetic fields
    • Theory of magnetism
    • Terminology associated with magnetic particle testing
  2. Characteristics of Magnetic Fields
    • Bar magnet
    • Ring magnet
  3. Effect of Discontinuities of Materials
    • Surface cracks
    • Scratches
    • Subsurface defects
  4. Magnetization by Means of Electric Current
    • Circular field
    • Longitudinal field
  5. Selecting the Proper Method of Magnetization
    • Alloy, shape and condition of part
    • Type of magnetizing current
    • Direction of magnetic field
    • Sequence of operations
    • Value of flux density
  6. Inspection Materials
    • Wet particles
    • Dry particles
  7. Principles of Demagnetization
    • Residual magnetism
    • Reasons for requiring demagnetization
    • Longitudinal and circular residual fields
    • Basic principles of demagnetization
    • Retentivity and coercive force
    • Methods of demagnetization
  8. Magnetic Particle Testing Equipment
    • Equipment selection considerations
    • Manual inspection equipment
    • Medium and heavy duty equipment
    • Stationary equipment
    • Mechanized inspection equipment
  9. Types of Discontinuities Detected by Magnetic Particle Testing
    • Inclusions
    • Blowholes
    • Porosity
    • Flakes
    • Cracks
    • Pipes
    • Laminations
    • Laps
    • Forging bursts
    • Voids
  10. Magnetic Particle Test Indications and Interpretations
    • Indications of nonmetallic inclusions
    • Indications of surface se
    • Indications of cracks
    • Indications of laminations
    • Indications of laps
    • Indications of bursts and flakes
    • Indications of porosity
    • Non-relevant indications
  11. Magnetization by Means of Electric Current
    • Circular techniques
    • Longitudinal technique
  12. Demagnetization Procedures
    • Need for demagnetization of parts
    • Current, frequency and field orientation
    • Heat factors and precautions
    • Need for collapsing flux fields
  13. Equipment
    • Portable type
    • Stationary type
    • Automatic type
    • Liquids and powders
    • Black light type
    • Light sensitive instruments
  14. Types of Discontinuities
    • In castings
    • In ingots
    • In wrought sections and parts
    • In welds

 

INSTRUCTOR MAGNETIC PARTICLE TESTING (NDT LEVEL II)

Y. Sinung Nugroho, Dipl.-Ing., MT.and Team

Y.Sinung Nugroho, Dipl.-Ing., MT. is lecturer at aeronautical department politeknik negeri Bandung(before known as Poltek ITB). He was graduated from Science et Techniques Aeronautiques and Science et Techniques Aerospatiales University of Paris X, France. And graduated from ITB Master Degree on Aeronautical Engineering. He has followed some courses as informal education to improve his competencies, such as ASNT NDT Ultrasonic Testing as level III (Three), Magnetic Particle Testing as level III (Three), Liquid Penetrant Testing as level III (Three), ASNT NDT Ultrasonic Testing as level II (Two), ASNT NDT Magnetic Particle Testing as level II (Two), ASNT NDT Liquid Penetrant Testing as level II (Two), Aircraft General License A1 (Aircraft Structure), Aircraft General License A4 (Aircraft Turbine Engine), Human Resource Development training, Airbus 320 & N 250 Landing Gears Training, Messier – Dowty, France, Composite Material Course, Aerodynamic Short Course and etc. Mr. Sinung Nugroho also has worked in some institution or companies so he has real work experiences and these are valuable for him when delivering training. He has taught training classes for industrial training in Indonesia.

 

VENUE MAGNETIC PARTICLE TESTING (NDT LEVEL II)

Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

TRAINING DURATION MAGNETIC PARTICLE TESTING (NDT LEVEL II)

5 days

 

JADWAL TRAINING 2019

  • 09 Sep 2019-13 Sep 2019
  • 28 Okt 2019-01 Nop 2019
  • 11 Nop 2019-15 Nop 2019
  • 02 Des 2019-06 Des 2019

 

INVESTMENT PRICE/PERSON

  1. 11.500.000/person (full fare) or
  2. 11.250.000/person (early bird, payment 1 week before training) or
  3. 10.950.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate ASNT
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

 

MAGNETIC PARTICLE TESTING (NDT LEVEL II)

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
 

cforms contact form by delicious:days

About the Author:

Post a Comment