VARIABLE SPEED DRIVES SYSTEM

VARIABLE SPEED DRIVES SYSTEM

Jogjakarta Plaza Hotel | 18 – 21  Februari 2013 | Rp 9.000.000,- /peserta

DESCRIPTION

Pumps, fans, blowers and compressors consume as much as 65% of this total. A large proportion of these applications are powered by fixed or constant speed drivers whose load demands often fluctuate. This poor match of speed and demand results in considerable wasted energy and significantly increased wear of system components. Variable speed drive technology is a cost effective method to match driver speed to load demands and is an excellent opportunity to reduce operating costs and improve overall efficiencies in your application.

This course gives you a fundamental understanding of the installation, operation and troubleshooting of variable speed drives. You will learn the basic setup of parameters, control wiring and safety precautions in installing a VSD. The various drive features such as operating modes, braking types, automatic restart and many others will be discussed in detail. You will learn the four basic requirements for a VSD to function properly with emphasis on typical controller faults, their causes and how they can be repaired.

The concluding section of the course gives you the fundamental tools in troubleshooting VSD confidently and effectively. Even though the focus of the course is on the direct application of this technology, you will also gain a thorough understanding of the problems that can be introduced by VSD such as harmonics, electrostatic discharge and EMC/EMI problems.

 

OBJECTIVES

At the end of this course participants will be able to:

1. Demonstrate a sound understanding of how AC Variable Speed Drives (VSD’s) work
2. Install VSDs properly
3. Select the right VSD for a given application
4. Troubleshoot VSDs competently
5. Competently explain how flux-vector control works for drive applications understand squirrel cage induction motors
6. Identify the protection and control system requirements for VSD’s
7. Interface VSD’s with PLCs
8. Understand the causes of motor burnout
9. Deal effectively with VSD harmonics and
10. EMC/EMI problems

 

COURSE OUTLINE

Introduction To Variable Speed Drives

• The Need for Variable Speed Drives
• Fundamental Principles of Speed Control
• Efficiency, Torque, Inertia,
• Horsepower/Power Factor
• Torque-Speed Curves
• How the motor produces Torque
• Types of Variable Speed Drives

3-Phase AC Induction Motors

• Basic Construction and Physical Configuration
• Principles of Operation and Performance

• Equivalent Circuit and Fundamental Equations
• Starting, Acceleration, Running and Stopping
• Power, Torque and Thermal Rating

Power Electronic Converters

• Definitions and Basic Principles
• Power Diodes and Thyristors
• Principles of Communication
• Power Electronic Rectifiers
• Power Electronic Inverters
• Gate Commutated Converters
• Gate Controlled Devices – GTO, FCT, GTR, FET, IGBT

Electromagnetic Compatibility (EMC)

• Sources of Electromagnetic Interference
• Harmonics on the Power Supply side of AC Converters
• The Effect of Harmonic Distortion on other connected Equipment
• Methods of reducing the effect of Supply side Harmonics
• Electric Motor Protection
• Thermal Overload Protection – Current Sensing
• Thermal Overload Protection – Direct Temperature Sensing

Protection Of Motors And Converters

• AC Frequency Converter Protection Fault Diagnostics
• Electric Motor Protection
• Thermal Overload Protection – Current Sensors
• Thermal Overload Protection – Direct Temperature

Control System For AC Variable Speed Drives

• The Overall Control System
• Power Supply to the Control System
• DC Bus Charging System
• VSD Control Loops (Open-Loop, Closed- Loop)
• Vector control and its applications Current Feedback in AC Variable Speed Drives
• Speed Feedback from the Motor

The Selection Of AC Converters For Variable Speed Drive Applications

• The Basic Selection Procedure
• Loadability of Converter Fed induction Motors
• Operation in the Constant Power Region
• The Nature of the Machine Load
• Starting and Stopping VSDs (Motor Braking)

The Selection Of AC Converters (Continued)

• How to Calculate Acceleration Torques and Times
• How to Select the correct Motor and
• Converter for Pump and Fan Loads
• How to Select the correct Motor and
• Converter for Constant Torque Loads, such as conveyors
• Summary of the Selection Procedure

Installation And Fault Finding Techniques

• General Installation and Environmental Requirements
• Power Supply Connections and Earthing
• Where to install the Contactors in the Power Where to install the Contactors in the Power Circuit
• Installing AC Converters into Metal Enclosures

 

 

TRAINING METHOD

• Presentation
• Discussion
• Case Study
• Evaluation

Instruktur: TUGINO

 

TIME AND PLACE

• 18-21  Februari 2013
• Jogjakarta Plaza Hotel

                                                        

 

TRAINING FEE

Rp 9.000.000,- /peserta /non recidential

FACILITY

• Training Kit/tas/jaket/flashdisk
• Handout
• Certificate
• Lunch + 2 X Coffee Break
• Souvenir

 

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me

 

cforms contact form by delicious:days