PENGUJIAN MATERIAL BERSIFAT MERUSAK (DESTRUCTIVE TEST)

PENGUJIAN MATERIAL BERSIFAT MERUSAK  (DESTRUCTIVE TEST)
Bandung | 06 – 09 October 2015 | Rp 7.950.000,-/peserta
Bandung | 02 – 05 November  2015 | Rp 7.950.000,-/peserta
Bandung | 08 – 11 December 2015 | Rp 7.950.000,-/peserta

 

PENDAHULUAN :

Pengujian sifat mekanik bahan merupakan disiplin ilmu yang fokus utamanya adalah mengetahui kemampuan bahan terhadap gaya dari luar atau beban (the response of metals to forces or load), sehingga dapat diketahui nilai batas kemampuannya dan  aman digunakan. Untuk dapat memahami lebih lengkap tentang pengujian sifat mekanik bahan diperlukan pengetahuan seperti:  kekuatan bahan (strength of materials), teorema elastisitas dan plastisitas, mesin disain , matematika, fisika, dll.

Pemahaman kekuatan bahan misalnya diasumsikan bahwa kekuatan bahan terfokus pada teori kekuatan, elastisitas dan plastisitas yang pada hakekatnya  asumsi tersebut hanya untuk bahan atau material yang homogen saja (tanpa melibatkan pengaruh temperatur misalnya). Hubungan sifat mekanik dan struktur mikro merupakan hal yang sangat penting dipahami, mengingat setiap perubahan struktur mikro akan berakibat pada perubahan sifat mekanik bahan, misalnya pengaruh temperatur tinggi akan menyebabkan sifat logam menjadi lunak dan sebaliknya pada temperatur rendah sifat logam akan menjadi getas.

Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Pengujian Material Bersifat Merusak (Destuctive Test).

PESERTA :

Para praktisi tingkat operator, tingkat penyelia atau perencana bidang pengujian material bersifat merusak pada industri rekayasa.

SASARAN TRAINING :

Setelah mengikuti pelatihan ini peserta diharapkan memiliki pemahaman lebih tentang pengetahuan dan keahlian dalam pengujian karakteristik material bersifat merusak.

CAKUPAN MATERI TRAINING :

1. Uji tarik (tensile test)
2. Uji kekerasan makro dan mikro (hardness test)
3. Uji torsi (torsion test)
4. Uji lelah (fatique test)
5. Uji lentur (bending test)
6. Uji geser (shear test)
7. Uji impak (impact test)
8. Metalografi
9. Uji komposisi kimiawi

Instruktur

SUGENG ISDWIYANUDI, Ir. MT. And Team
He was graduated from politeknik  universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.: pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System.  In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

VENUE :

Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

 

TRAINING DURATION :

4 days

TRAINING TIME :

1. 24 Feb 2015-27 Feb 2015
2. 02 Mar 2015-05 Mar 2015
3. 14 Apr 2015-17 Apr 2015
4. 26 May 2015-29 May 2015
5. 16 Jun 2015-19 Jun 2015
6. 30 Jun 2015-03 Jul 2015
7. 25 Aug 2015-28 Aug 2015
8. 31 Aug 2015-03 Sep 2015
9. 06 Oct 2015-09 Oct 2015
10. 02 Nov 2015-05 Nov 2015
11. 08 Dec 2015-11 Dec 2015

 

 

INVESTATION PRICE/PERSON :

1. Rp 7.950.000/person (full fare)  or
2. Rp 7.750.000/person (early bird, payment 1 week before training)  or
3. Rp 7.500.000/person (if there are 3 or more participants from the same company)

 

 

FACILITIES FOR PARTICIPANTS:

1. Training Module
2. Flash Disk contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. T-Shirt
6. Backpack
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Lunch and twice coffeebreak everyday of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me

 

cforms contact form by delicious:days