ADVANCED OIL AND GAS PRODUCTION SYSTEM

ADVANCED OIL AND GAS PRODUCTION SYSTEM

Hotel Golden Flower, Bandung |25 – 28 April 2011| Rp 7.250.000,-/person
Hotel Golden Flower, Bandung |10 – 13 October 2011| Rp 7.250.000,-/person

TRAINING INTRODUCTION :

The rapidly increasing worldwide demand for natural gas as an energy source requires expertise in gas engineering technology. Incorporating a balance between theory and application, course emphasis is on training participants for immediate application of acquired techniques to field problems.

Production is defined as the operations involved in bringing well fluids to the surface and preparing the fluids for transport to a refinery via pipelines or trucks. The first step in production is to start the well fluids flowing to the surface (called “well completion”). Well servicing and workover consists of performing routine maintenance operations (such replacing worn or malfunctioning equipment) and performing more extensive repairs, respectively. Well servicing and workover are an intermittent step and necessary to maintain the flow of oil and gas. Next, the fluid must be separated into its components of oil, gas, and water; stored; and treated (for purification), measured, and tested before being transported to the refinery.

This training will provide the principle and yet some practical and theoretical aspect that can be applied on daily work faced by production engineers and supervisor in the oil industry.

SUBJECT LEARNED :

1. All aspects of completions are covered in sufficient detail to permit participants to review his/her current practices
2. The fundamental concepts of production operations and their proper application in the field
3. Production equipment such as wellhead, tubing and packers, well completions and workover as well as well test and problems, production logging and cementing will also covered
4. Production logs and how and when to use them; evaluation techniques for cement bond logs and pulse echo tools

TRAINING BENEFITS :

1. Learn how to plan and implement well completions, workovers, stimulation treatments, and routine production operations with an efficiency that increases profits
2. Learn about the role of rock mechanics in completions, stimulation, and workovers
3. Be able to give suggest or discover the procedures and techniques that increase production and cut operating costs
4. Be Able to identify and implement production improvement opportunities that can be carried out by either rig or non-rig well interventions
5. Implementation of appropriate technology, either from internal or external sources, in well design, whilst ensuring that the well value is maximised

TRAINING MATERIAL OUTLINE :

1.  GEOLOGICAL CONSIDERATION

1. Formation Rock
2. Primary and Secondary Migrations
3. Reservoir Traps

2.  RESERVOIR FUNDAMENTALS THEORY

1. The Nature of Rocks and Fluids
2. Porosity and Permeability
3. Productivity Index
4. Volumetric Calculation
5. Other Calculations and Decline Curves

3.  FLUID FLOW

1. Well Productivity
2. Choke and Reservoir Fluids
3. Inflow and Outflow

4.  PRODUCTION OPERATIONS

1. Well head and Well Head Equipment
2. Multiple Orifice
3. Routine Operations
4. Opening and Shut-in Well Procedure

5.  WELL TESTING AND SATELLITE SYSTEM

1. Test Separator Operations and Equipments
2. Gas Systems Instruments
3. Flare System and Depressurising
4. Pigging Techniques and Procedures
5. Sampling and Analysis
6. BS & W and API Gravity Measurement
7. Protective Steam Tracing

6.  SURFACE PRODUCTION OPERATIONS

1. Process, Level, Temperature and Pressure Controls
2. Oil treating , Heater treater and Dehydrator
3. Separators, Stage Separators and Sizing
4. Two-phase and Three-phase Separation
5. Skimmer tank and Flotation unit

7.  WELL PROBLEMS

1. Low Production and Formation Damage
2. Low Reservoir
3. Plug-in Tubing or Perforations
4. High Viscosity
5. High Back Pressure
6. Inadequate Artificial Lift
7. Water Production and Mechanical Problem
8. Protective Steam Tracing

8.  PRODUCTION LOGS

9.  WELL COMPLETIONS

10. PRIMARY CEMENTING AND SQUEEZE CEMENTING

11. FLUID COMPLETIONS

12. SAND CONTROL

1. Gravel Pack, Resin and Fraspac

13. WORKOVERS

14. PARAFFIN AND ASPHALTENES

1. Chemical analysis
2. Precipitation Mechanism
3. The wax and Paraffin Problems

15. OIL EMULSIONS

1. Emulsion Built-up and Emulsifying Agent
2. Sampling and Analysis
3. Emulsion Treating
4. Heat and Chemical Treatment
5. Electrostatic Coalescing

16. SCALE PROBLEMS

1. Scale Composition, Prediction and Identification
2. Mechanic and Chemical methods
3. Scale Prevention and Inhibitors

17. CORROSION PREVENTIONS

1. Basic Theory
2. Detection and Measurement
3. Prevention and Material Used
4. Coating and Chemicals
5. Cathodic Protections and inhibitors

THIS TRAINING IS DESIGNED FOR :

• Production, Operations, Facilities and Senior Petroleum Engineers
• Surface Equipment Technicians, Technical or Reservoir Engineers
• Supervisory Personnel who interact with field facility engineers/operators
• Production Managers and Field Production Supervisors
• Engineers and other personnel involved with the daily operation and management of producing oil and gas wells.

INSTRUKTUR TRAINING

Dr.Ir. Sudjati Rachmat, DEA. and  Team

Dr.Ir. Sudjati Rachmat, DEA. adalah dosen di jurusan perminyakan ITB sejak tahun 1979 sampai sekarang. Beliau alumnus dari ITB lulus tahun 1977, kemudian melanjutkan pendidikannya di Diplome d’Etude Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Dan pada tahun 1985 – 1987 beliau mengambil program Docteur en Mecanique de Fluide (Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE.

Dr. Sudjati Rachmat sering menjadi instruktur dalam banyak pelatihan yang berkaitan dengan perminyakan untuk perusahaan di seluruh Indonesia, diantaranya seperti Pertamina, Chevron, Badak LNG, Total, Vico, Mobil Oil Indonesia, Ministery of Mining and Energy, Unocal Indonesia, Lemigas, IATMI-IWPL Migas, PPTM Migas, PT Caltex Pacific Indonesia, Gulf, Arco, dll.

Topik-topik training yang Beliau sampaikan diantaranya adalah production surface and down hole equipment, Basic Reservoir Engineering, Sucker Rod Pumping Theory and Practice, Production Logging Engineering, Nodal Analysis and Production Optimization, Well Test, Operation and Interpretation, Well Design, Completion and Workover, Numerical and Statistical Method for Petroleum Engineering Problems, Oil-Well Stimulation, Hydraulic Fracturing, Statistics for Petroleum Engineering, Reservoir Simulation for Enhanced Oil Recovery, Applied Reservoir Engineering and Reservoir Simulation, Aspects of Horizontal Well Technology, Geology and Geophysics Modeling, Advanced Programming on Numerical Analysis and Industrial Information System, Management Information System, Well Stimulation of Oil and Gas Reservoir, Horizontal Well Technology, Transportation of Oil and Gas, Sand Control Technology, dan lain-lain.

Beliau banyak melakukan penelitian di bidang MIGAS dan telah mempublikasikan dan menseminarkannya di forum dunia.

VENUE :

Hotel Golden Flower,  Bandung

TRAINING DURATION :

4 days

TRAINING TIME :

1. 25 – 28 April 2011
2. 10 – 13 October 2011

INVESTATION PRICE/PERSON :

1. Rp 7.250.000/person (full fare)  or
2. Rp 7.000.000/person (early bird, payment before 4 October 2010) or
3. Rp 6.750.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

1. Training Module
2. Training CD Contains Training Material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or Waistcoat or T-Shirt
6. Bag or Backpackers
7. Training Photo
8. Training Room with Full AC Facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified  instructor
11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me

 

cforms contact form by delicious:days