By April 24, 2018 0 Comments Read More →

ALIGNMENT AND BALANCING IN ROTATING EQUIPMENT

ALIGNMENT AND BALANCING IN ROTATING EQUIPMENT

Bandung | 02 – 04 Mei 2018 | Rp. 5.950.000/ peserta 
Bandung | 06 – 08 Juni 2018 | Rp. 5.950.000/ peserta 
Bandung | 02 – 04 Juli 2018 | Rp. 5.950.000/ peserta 
Bandung | 06 – 08 Agustus 2018 | Rp. 5.950.000/ peserta

Jadwal Training 2018 Selanjutnya …

 

 


TRAINING INTRODUCTION:

Misalignment and unbalance are two major causes of vibration in rotating equipment, vibration that means increased maintenance and reduced machine life. With proper alignment and balancing programs, reductions in maintenance and operating costs can easily reach into six figures per year. When shafts are misaligned, forces are generated that can produce stresses on the rotating and stationary components. Even when couplings do not fail from the stresses produced by gross misalignment, bearings and seals will most certainly fail under these conditions. In extreme cases of misalignment, even the shafts may fracture and break. Out-of-balance machine components are a principal cause of machinery vibration. The condition often is caused by less-than-perfect manufacturing, and it is routine for rotating equipment, reciprocating machines and vehicles. Mass balancing may be necessary if an operation or product requires quiet operation, high speeds, long bearing life, operator comfort, controls free of malfunctioning or a quality feel. There are three types of balancing machines: static balancing stands, hard bearing machines, and soft bearing machines. Static balancing stands do not require spinning up and can correct for static or single-plane unbalance only. They feature low cost and safe operation.



TRAINING MATERIAL OUTLINE ROTATING EQUIPMENT

  • Mechanical Equipment Overview
  • Rim and Face Alignment
  • Reverse Dial Indicator Alignment
  • Determine Balance Weight
  • Combine Balance Weights
  • Single Plane Balancing
  • Dual Plane Balancing
  • Laser Alignment & Balancing



TRAINING BENEFIT:

  • Participant can develop, implement and supervise the alignment process
  • Economize the time, money and company’s resources by implementing appropriate alignment and balancing
  • Prevent the company’s equipment and tools from damage and make the machine’s living period longer
  • Decrease the down time
  • Increase the profit



WHO SHOULD ATTEND THIS TRAINING?

Plant and Pipeline Operators, Supervisors, Engineers and Manager.



TRAINING INSTRUCTOR

Ir. Deddy Nugraha
Ir. Deddy Nugraha is a dedicated experienced fulltime trainer and technical consultant since 2002. He holds a B.S. degree in Mechanical Engineering from ITB, Bandung. He has worked nationally in a wide variety of industries including: technology, aerospace, utilities, auditing, mining and institutions thus engaged as a corporate consultant. He also holds certifications for those particular fields from Snecma, France; Engine Support Inc., USA; Danobat, Spain; DNV, Singapore; MTU, Germany and FAA Auditor, USA. Mr. Nugraha is a member of Indonesian Society for Reliability and was elected as General Sectretay for 2004-2007 period. He has trained hundreds of managers, engineers and floor associates, subjects taught to include; CMMS, RCM, TPM, Project Management, Quality Process Control, Corrosion Control and Protection, Failure Analysis, Engineering Design, Instalation & Constrcution, Inventory Control and Management. Major clients include: Pertamina, British Petroleum, Petrochina, Siemen Power, PT. Indonesia Power, PT. Krakatau Steel, Freeport Indonesia, PT. Surveyor Indonesia, Chevron, Medco Energy, PT. Aneka Tambang, Garuda Maintenance Facility, PT. Perusahaan Gas Negara, PT. Semen Padang, PT. Semen Gresik, PT. Indah Kiat Pulp & Paper, PT. Tjiwi Kimia, PT. Pupuk Kujang and PT. Kaltim Prima Coal.



VENUE

Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

 

TRAINING DURATION 

3 days

 

 

 

JADWAL TRAINING

  1. 02 May 2018-04 May 2018
  2. 06 Jun 2018-08 Jun 2018
  3. 02 Jul 2018-04 Jul 2018
  4. 06 Aug 2018-08 Aug 2018
  5. 03 Sep 2018-05 Sep 2018
  6. 08 Oct 2018-10 Oct 2018
  7. 05 Nov 2018-07 Nov 2018
  8. 26 Dec 2018-28 Dec 2018

 

 

INVESTATION PRICE/PERSON

  1. Rp 5.950.000/person (full fare) or
  2. Rp 5.750.000/person (early bird, payment 1 week before training) or
  3. Rp 5.500.000/person (if there are 3 or more participants from the same company)



FACILITIES FOR PARTICIPANTS

  1. Training Module
  2. Training CD Contains Training Material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or Waistcoat or T-Shirt
  6. Bag or Backpackers
  7. Training Photo
  8. Training Room with Full AC Facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified  instructor
  11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
 

cforms contact form by delicious:days

Posted in: Bandung, Mechanical

About the Author:

Post a Comment