By October 3, 2011 0 Comments Read More →

BASIC POWER SYSTEM

BASIC POWER SYSTEM

Wisma MM UGM, Yogyakarta  | 6 s.d 8 Desember 2011 | Rp. 6.500.000,-/participant (non residential)




DESKRIPSI

It is estimated that electrical drives and other rotating equipment consume about 50% of the total electrical energy consumed in the world today. The cost of maintaining electrical motors can be a significant amount in the budget item of manufacturing and mining industries. This workshop gives you a thorough understanding of electrical motor’s working, maintenance and failure modes and gives you the tools to maintain and troubleshoot electrical motors. You will gain valuable insight into the selection of the protection necessary to ensure your motors are protected against fault conditions, so as to ensure reliability and long life.

You will gain a fundamental understanding of the installation, operation and troubleshooting of electric motors. Typical applications of electric motors in mining, manufacturing, materials handling and process control are covered in detail. You will learn the basic steps in specifying, installing, wiring and commissioning motors. The concluding section of the course gives you the fundamental tools in troubleshooting motors confidently and effectively.



MATERI

  •  Basic principles of rotating electric machines
  • Fundamental principles of speed control
  • Efficiency, torque, inertia, horsepower/power factor
  • Torque-speed curves
  • How the motor produces torque
  • Types of motors

AC MOTOR THEORY, CONSTRUCTION AND MAINTENANCE

  • Basic construction and physical configuration, windings
  • Principles of operation and performance

THREE PHASE AC INDUCTION MOTORS

  • Components
  • Theory of operation
  • Induction motor design
  • Duty cycles
  • Insulation and Cooling requirements
  • Starting methods
  • Selecting motors
  • Maintenance of AC machines
  •  Types of faults, fault finding and testing of AC machines
  • Testing instrumentation

PROTECTION OF AC MOTORS

  • Protective devices
    1. Thermal Overload
    2. Over Current / Overload
    3. Under-voltage / Over-voltage
    4. Under frequency
    5. Current unbalance or negative phase sequence
    6. Earth fault protection
    7. Pole slip / Out of step
    8. Loss of excitation
    9. Over fluxing
    10.  Stall protection / acceleration time / Start up supervision (Time between starts / Starts per hour)
    11. Voltage controlled or restrained over current
  • Protection settings

SPEED CONTROL OF AC MOTORS

  • Introduction to Variable Speed Drives or Power Electronic Converters
  • Types, and Designs of Variable Speed Drives

PROTECTION OF AC CONVERTORS AND MOTORS

  • Frequency converter protection circuits
  • Protection settings

CONTROL SYSTEMS FOR AC VARIABLE SPEED DRIVES

  • Control theory of VSDs explained

THE SELECTION OF AC CONVERTORS FOR VARIABLE SPEED DRIVE APPLICATIONS

  • Selection procedure
  • Nature of the load
  • Selection of correct size motor and converter

INSTALLATION AND COMMISSIONING OF AC VARIABLE SPEED DRIVES

  • General Installation and environmental requirements
  • Electrical connections and Earthing requirements
  • Control wiring and pre-commissioning
  • Commissioning tests

NEW TECHNOLOGIES AND DEVELOPMENTS



METODE

Presentasi, Diskusi, Simulasi, Studi kasus, Evaluasi



Peserta

Anyone associated with the use of electrical motors in the industrial or automation environment. The workshop will also benefit those working in system design as well as site commissioning, maintenance and troubleshooting. Typical personnel who would benefit are:

  • Plant Engineers
  • Instrument Technicians
  • Operations Personnel
  • Electrical Maintenance Technicians & Supervisors
  • Instrument and Control Engineers
  • Process Control Engineers
  • Mechanical Engineers
  • Service Technicians
  • Maintenance Personnel



PEMATERI

Prof. Dr. Ir. Hamzah Berahim, M.T. and Team



WAKTU & TEMPAT

  •  6 s.d 8 Desember 2011
  • Wisma MM UGM, Jl. Colombo No.1 Yogyakarta
  • Pukul 08.00 – 16.00 WIB

(Inhouse Training Depend on Request)



Investasi

Fee course :

  • Rp. 6.500.000,-/participant (non residential)
  • Free Discount 5 % for 3 participant
Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
 

cforms contact form by delicious:days

Posted in: Electrical, Yogyakarta

About the Author:

Post a Comment