Compressor Operations, Maintenance & Troubleshooting

compressors is auxiliaries to control the air flow, pressure, and actuators

Jadwal Training 2019 Selanjutnya …

Deskripsi Training Compressor Operations, Maintenance & Troubleshooting

Production continuity is a keyword in any process of production activities, in which power system play important role to keep all of the operation. Compressor is known for its capability to store energy in the form of air pressure. In industrial application, compressors are completed with auxiliaries to control the air flow, pressure, and actuators. Compressors will become advantage if it’s operated and maintained properly. Compressors principles and their system performance however should be understood by operator and any person who get involved with them to increase performance of the operation, maintenance, safety, etc.

Materi Training Compressor Operations, Maintenance & Troubleshooting

1. FUNDAMENTALS:

Explain the theory of air/gas compression.
Describe how altitude and moisture affects the compression of air.
Describe the principles of operation of positive displacement and dynamic compressors.
Define air compression terminology such as absolute and gauge pressures, compressor
Displacement and compressor capacity, free air, volumetric efficiency, single and double acting, single and multistage.
Given relative data, perform basic calculations to solve for compressor displacement and compressor volumetric efficiency.

2. RECIPROCATING COMPRESSORS:

State and describe the different types of single and multi-stage reciprocating compressors, state the function of the various compressor parts, including valves.
Describe the methods employed to cool air or gas during compression.
List and describe the different types of prime movers used for compressors.

3. ROTARY COMPRESSORS:

Describe the principles of operation, their application, volume and pressure capabilities, methods of regulation, advantages and disadvantages of the following types of (positive displacement) rotary compressors:

sliding vane
the lobe type
roots type
screw
liquid-sealed

4. CENTRIFUGAL AND AXIAL COMPRESSORS:

Describe the design and operation of the volute and diffuser type centrifugal compressors.
Describe the design and operation of the single-stage double-flow and the four-stage centrifugal compressors.
Describe the design and operation of an axial flow compressor.
State the causes and remedies of compressor surging.

5. COMPRESSOR SYSTEM AUXILIARIES:

Describe the design and operation of intercoolers and aftercoolers; state their location within the system, describe the maintenance requirements of these components.
State the need for air receivers, their preferred location, and the inspection and maintenance requirements as per Code.
Describe the use of air filters, list and provide a description of the different types commonly used.

6. OPERATION, CONTROL AND MAINTENANCE:

Explain the following methods employed to control compressor output:

1. Start/stop, dual control
2. Variable-speed
3. Suction line valve
4. Suction or discharge valve
5. Adjustable stroke
6. Variable clearance volume

List and describe the operation of the various types of controllers and safety devices used in a compressed air system. Describe how these devices can be tested while system is in operation.
Describe the internal and external methods of compressor lubrication.
State the various operational checks done by an operator on both the compressor(s) and the compressed air/gas system to ensure safe and efficient operation.
State the preventive maintenance requirements of compressors, auxiliaries, piping and receivers.
State the probable causes of compressed air/gas compressor, receiver or pipeline explosions.

7. ACT, REGULATIONS AND CODES:

The candidate is expected to be able to locate information relating to the staffing, operation, maintenance, inspection, and testing of the compressor plant and its equipments.
8. SAFETY:

The candidate is expected to be able to fully explain the dangers associated with the operation of a compressor plant and all its components, and state the precautions to be taken to minimize or prevent such dangers.

Peserta

The training can be important for all personnel involved with the design, installation, maintenance, operation and servicing of compressor and their basic systems.

Metode

Presentasi, Diskusi , Studi Kasus

Jadwal Training 2019

Hotel Santika Kuta, Bali
Hotel Nagoya Plaza, Batam
Hotel Fave, Balikpapan
Hotel Aston, Manado
Hotel Lombok Raya, Mataram
Hotel Serela Merdeka, Bandung
Hotel Santika Pandegiling, Surabaya
Sofyan Hotel Betawi, Jakarta
Hotel Ibis Solo
Hotel Ibis Simpang Lima, Semarang
Hotel Ibis Malioboro, Yogyakarta
13-14 Agustus 2019
19 – 20 Agustus 2019
26 -27 Agustus 2019
02 – 03 September 2019
09-10 September 2019
16 – 17 September 2019
23 – 24 September 2019
30 September – 01 Oktober 2019
07 – 08 Oktober 2019
14 – 15 Oktober 2019
21 – 22 Oktober 2019
28 – 29 Oktober 2019
04 – 05 November 2019
11 – 12 November 2019
18 – 19 November 2019
25 – 26 November 2019
02 -03 Desember 2019
09 – 10 Desember 2019
16 – 17 Desember 2019
23 – 24 Desember 2019
30 – 31 Desember 2019

Investasi dan Fasilitas

Rp 7.900.000 (Non Residential, Belum Terasuk Pajak PPn 10%) untuk lokasi di Bali, Batam, Balikpapan, Manado atau Lombok
Rp 6.900.000 (Non Residential, Belum Terasuk Pajak PPn 10%)) untuk lokasi di Bandung, Jakarta atau Surabaya
Rp 5.900.000 (Non Residential, Belum Terasuk Pajak PPn 10%) untuk Lokasi Solo, Semarang atau Yogyakarta
VIP training Rp 7.9000 (3 Hari, Non Residential dengan tambahan Fasilitas Paket studi lapangan/ City tour dan Belum Termasuk Pajak PPn 10%) untuk Yogyakarta, Semarang atau Solo
VIP training Rp 8.9000 (3 Hari, Non Residential dengan tambahan Fasilitas Paket studi lapangan/ City tour dan Belum Termasuk Pajak PPn 10%) untuk Bandung, Jakarta atau Surabaya
VIP training Rp 9.9000 (3 Hari, Non Residential dengan tambahan Fasilitas Paket studi lapangan/ City tour dan Belum Termasuk Pajak PPn 10% ) untuk Bali, Batam, Balikpapan, Manado atau Lombok
Quota minimum 2 peserta
Quota minimum 3 peserta ( Untuk Manado, Balikpapan dan Lombok Quota minimal 4 peserta)
Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)

Instruktur

Ir Teguh Pudji Poerwanto MT and Team