MAINTENANCE PLANNING, SCHEDULING, COST CONTROL & OUTAGE

Ada 6 Fase dalam manajemen kerja yang mampu mengoptimalkan kegiatan usaha. Training maintenance ini akan mengulasnya

Yogyakarta | 10 – 12 September 2019 | Rp. 6.000.000 Per Peserta
Yogyakarta | 01 – 03 Oktober 2019 | Rp. 6.000.000 Per Peserta
Yogyakarta | 12 – 14 November 2019 | Rp. 6.000.000 Per Peserta
Yogyakarta | 03 – 05 Desember 2019 | Rp. 6.000.000 Per Peserta

 

 

OVERVIEW MAINTENANCE TRAINING

Maintenance Planning, Scheduling, Cost Control and Outage Management is designed to build competency in Work Control as a primary skill set in the Competency Map for Facilities Maintenance Management. The course will focus on the six phases of work management (work identification, planning, prioritization, scheduling, execution and history capture). Also covered will be: optimizing preventive and condition-monitoring activities, critical equipment analysis and critical spares control, managing shutdowns/turnarounds, emergency response work, and developing meaningful Key Performance Indicators. The objective of this course is to develop a sound understanding of work control so that delegates’ work management systems can be improved and streamlined to gain the results of higher productivity, greater equipment/process reliability, and lower operational costs. Critical issues, relevant to the participant’s own experiences, are identified and analyzed to maximize effectiveness and equipment care standards.

 

OBJECTIVES MAINTENANCE TRAINING

By the end of the program, participants will be able to:

• Apply the latest concepts and techniques needed for effectively planning, scheduling, cost control and outage management
• Manage routine, corrective, as well as large scale preventive maintenance activities.
• Review the critical operational requirements for successful planning and control of the maintenance work.
• Use the right Key Performance Indicators (KPIs) for the measurement and evaluation of the maintenance department.
• Create more useful equipment and work histories

 

MAINTENANCE TRAINING CONTENTS

1. Basic of Maintenance Planning & Scheduling
   • Introduction to Maintenance Management
   • Maintainability
   • Reliability and Availability
   • Replacement
   • The Important of Maintenance Planning
   • Aspects of Maintenance Planning
   • Scheduling
2. Detail Of Maintenance Work Planning, Scheduling and Control
   • Network terminology
   • Network Planning
   • Definition of Notifications, Defects, Deviations
   • Notification Process, Role & Principle
   • Prioritizing Notifications
   • Maintenance Schedule
   • Weekly Master Schedule
     • Master Schedule Purpose
     • Categorize the Outstanding Workload
     • Determine Resource Availability
     • Determine Equipment Non-utilization Profile
     • Develop Draft Master Schedule
     • Conduct Master Schedule Review Meeting
     • Final Master Schedule and Implementation

3. Outage Management Program:
   • The determination of the outage work scope
   • Outage Scheduling
   • Making Work Package including resource requirements(human resource, material and tools) andmeans
   • Establishment of quality standards and objectives work
   • Establishment of the budget and costs
   • Determination method/standard communication procedure
   • Implementation of the overhaul (OH)
   • Reporting results of the overhaul (OH)
   • overhaul(OH)
   • ReportingresultsOH
4. Cost Effective & Conrol Maintenance Management

• Introduction to Cost Effective Maintenance Management
• Key Maintenance Definitions
• The Management Process in Maintenance
• Maintenance and Competitive Advantage
• Total Productive Maintenance
• Overall Equipment Effectiveness
• Budget Planning
• Cost minimization through Lean thinking
• Maintenance Cost control, Budget and estimation

5. Maintenance Performance and Standarization
   • Performance Measurement
   • CMMS & Maintenance Statistic
   • Key Performance Indicators in Maintenance
   • Measurement Outage Management (KPI & Maturity Level)
   • Standardization in Maintenance

 

WHO SHOULD ATTEND 

This training is recommended to be followed by the Engineer, Managers and Planners who responsible for Maintenance Planning, Scheduling, Cost Control & Outage Management.

 

METHODS

• Lecturing
• Discussion/Sharing
• Case Study
• Simulation
• Evaluation

 

INSTRUCTOR 

Ir. Teguh Pudji Purwanto, MT & Team

(Expert in mechanical dan electrical engineering)

 

JADWAL TRAINING 2019

• Batch 9: 10 – 12 September 2019
• Batch 10: 01 – 03 Oktober 2019
• Batch 11: 12 – 14 November 2019
• Batch 12: 03 – 05 Desember 2019
• 08.00 – 16.00 WIB

Yogyakarta: Cavinton Hotel Yogyakarta ; Neo Malioboro Hotel Yogyakarta Ibis Styles Hotel Yogyakarta
Surabaya: Hotel Santika Pandegiling Surabaya
Malang: Best Western OJ Hotel Malang ; Harris Hotel & Convention Malang
Jakarta: Dreamtel Jakarta Hotel ; Ibis Jakarta Tamarin Hotel
Bandung: Golden Flower Hotel Bandung ; Serela Merdeka Hotel Bandung
Bali: Ibis Bali Kuta Hotel ; Harris Kuta Raya Hotel Bali

In House Training : Depend on request

 

TUITION FEE

• 6.000.000 IDR / participant (for public training in Yogyakarta)  -> minimum quota of 2 participants
• 7.000.000 IDR / participant (for public training in Bandung, Jakarta, Surabaya)  ->  minimum quota of 3 participants
• 8.000.000 IDR / participant (for public training in Bali)  -> minimum quota of 3 participants

 

FACILITIES 

INCLUDE:

• Meeting Room at Hotel, Coffe Break, Lunch
• Module (hard & soft copy/flashdish)
• Training Kit, Souvenir, Sertifikat
• Airport pick up services
• Transportation during training

EXCLUDE:

• Penginapan peserta training
• Pajak (Ppn 10 %)

MAINTENANCE PLANNING, SCHEDULING, COST CONTROL AND OUTAGE MANAGEMENT

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me

 

cforms contact form by delicious:days