PRODUCTION OF HELICAL GEAR

PRODUCTION OF HELICAL GEAR

Bandung | 17 – 20 Maret 2015 | Rp 7.950.000,-/peserta
Bandung | 14 – 17 April 2015 | Rp 7.950.000,-/peserta
Bandung | 05 – 08 May 2015 | Rp 7.950.000,-/peserta
Bandung | 23 – 26 Juni 2015 | Rp 7.950.000,-/peserta

Jadwal Training 2015 Selanjutnya …

 

 

 

LATAR BELAKANG :

Roda gigi (gear) merupakan salah satu komponen mesin yang banyak digunakan sebagai komponen yang berfungsi untuk meneruskan dan memindahkan putaran atau daya. Keausan atau kerusakan yang terjadi pada elemen geometrik roda gigi tersebut dapat  disebabkan oleh sewaktu proses pembuatannya di mesin perkakas, sewaktu merakit tidak sesuai dengan toleransi geometrik yang diinginkan, dan faktor kelelahan bahan roda gigi serta faktor pembebanan yang terjadi. Apabila salah satu roda gigi mengalami kerusakan dapat mengakibatkan kerusakan pada roda gigi pasangannya atau kerusakan pada komponen mesin yang lainnya.

Penangannya yaitu mengganti roda gigi yang baru dengan cara memesan (membeli) atau membuat sendiri di bengkel produksi yang tersedia.  Untuk mendukung kondisi tersebut diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi bidang Pembuatan Helical Gear, supaya dapat menghasilkan komponen roda gigi dengan ketelitian geometrik yang tinggi.

SIAPA YANG MENGIKUTI TRAINING INI  :

Para praktisi tingkat operator, tingkat penyelia atau perencana bidang proses produksi pada industri manufaktur dan industri minyak.

TUJUAN TRAINING :

Setelah Pelatihan para peserta diharapkan memiliki Pemahaman lebih tentang pengetahuan proses freis dan keahlian dalam mengoperasikan mesin freis untuk pembuatan helical gear.

CAKUPAN MATERI TRAINING HELICAL GEAR:

1.   Proses freis

• Bagian-bagian utama mesin freis dan fungsinya
• Parameter proses freis
• Prinsip kerja proses freis
• Perencanaan proses freis
• Keselamatan kerja

2.   Pembuatan bentuk balok (latihan awal)

3.   Penggunaan kepala pembagi

4.   Pembuatan spur gear (roda gigi lurus)

5.   Pembuatan helical gear (roda gigi miring)

6.   Pengukuran elemen geometrik helical gear

Trainer

SUGENG ISDWIYANUDI, Ir. MT. And Team

was graduated from politeknik  universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.: pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System.  In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

VENUE :

Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

 

TRAINING DURATION :

4 days

TRAINING TIME :

1. 03 Feb 2015-06 Feb 2015
2. 17 Mar 2015-20 Mar 2015
3. 14 Apr 2015-17 Apr 2015
4. 05 May 2015-08 May 2015
5. 23 Jun 2015-26 Jun 2015
6. 07 Jul 2015-10 Jul 2015
7. 04 Aug 2015-07 Aug 2015
8. 15 Sep 2015-18 Sep 2015
9. 20 Oct 2015-23 Oct 2015
10. 17 Nov 2015-20 Nov 2015
11. 15 Dec 2015-18 Dec 2015

 

INVESTATION PRICE/PERSON :

1. Rp 7.950.000/person (full fare)  or
2. Rp 7.750.000/person (early bird, payment 1 week before training)  or
3. Rp 7.500.000/person (if there are 3 or more participants from the same company)

 

 

FACILITIES FOR PARTICIPANTS:

1. Training Module
2. Flash Disk contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. T-Shirt
6. Backpack
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Lunch and twice coffeebreak everyday of helical gear training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me

 

cforms contact form by delicious:days