TROUBLESHOOTING, INSPECTION, AND MONITORING OF MACHINERY

TROUBLESHOOTING, INSPECTION, AND MONITORING OF MACHINERY

Bandung | 17 – 20 Maret 2015 | Rp 7.950.000,-/peserta
Bandung | 20 – 23 April 2015 | Rp 7.950.000,-/peserta
Bandung | 18 – 21 May 2015 | Rp 7.950.000,-/peserta
Bandung | 08 – 11 Juni 2015 | Rp 7.950.000,-/peserta
Bandung | 27 – 30 Juli 2015 | Rp 7.950.000,-/peserta

Jadwal Training 2015 Selanjutnya …

 

PENDAHULUAN :

Mesin industri atau power plant merupakan pendukung industri yang utama dan memiliki tingkat kritis yang sangat tinggi. Bila terjadi kerusakan secara tiba-tiba industri tersebut akan mengalami kerugian yang sangat besar baik secara moril maupun meteriil. Oleh karena itu mesin industri harus dijaga jangan sampai terjadi gangguan, agar gejala kerusakan dapat dideteksi sedini mungkin. Untuk mengantisipasi kondisi tersebut diperlukan inspeksi dan monitoring secara rutin dan periodik, sehingga bila terjadi gejala gangguan dapat dengan segera diperbaiki agar tidak menimbulkan kerusakan yang lebih parah.

Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Trouble Shooting, Inspection and Monitoring of Machinery.

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ?:

Para praktisi tingkat operator, tingkat penyelia atau perencana bidang inspeksi dan monitoring kondisi mesin pada industri manufaktur dan industri minyak.

MANFAAT YANG DIPEROLEH:

Setelah  mengikuti pelatihan ini peserta diharapkan akan memiliki :

1. Pemahaman tentang pengetahuan teknik monitoring dan memilih teknik monitoring kondisi mesin.
2. Keahlian dalam melakukan monitoring kondisi mesin.

 

CAKUPAN MATERI TRAINING :

1. Teknik monitoring kondisi mesin
2. Pemilihan teknik monitoring kondisi mesin
3. Inspeksi dan monitoring visual
4. Inspeksi, monitoring, dan analisis pelumas
5. Inspeksi, monitoring, dan analisis getaran
6. Analisis spektrum getaran
7. Inspeksi dan monitoring geometrik
8. Analisis levelling, run out, and misalignment

 

TRAINING INSTRUCTOR

SUGENG ISDWIYANUDI, Ir. MT. And Team

was graduated from politeknik  universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.: pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System.  In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

VENUE :

Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

 

TRAINING DURATION :

4 days

TRAINING TIME :

1. 09 Feb 2015-12 Feb 2015
2. 17 Mar 2015-20 Mar 2015
3. 20 Apr 2015-23 Apr 2015
4. 18 May 2015-21 May 2015
5. 08 Jun 2015-11 Jun 2015
6. 27 Jul 2015-30 Jul 2015
7. 10 Aug 2015-13 Aug 2015
8. 15 Sep 2015-18 Sep 2015
9. 26 Oct 2015-29 Oct 2015
10. 17 Nov 2015-20 Nov 2015
11. 30 Nov 2015-03 Dec 2015

 

 

INVESTATION PRICE/ PERSON :

1. Rp 7.950.000/person (full fare)  or
2. Rp 7.750.000/person (early bird, payment 1 week before training)  or
3. Rp 7.500.000/person (if there are 3 or more participants from the same company)

 

FACILITIES FOR PARTICIPANTS:

1. Training Module
2. Flash Disk contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. T-Shirt
6. Backpack
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Lunch and twice coffeebreak everyday of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me

 

cforms contact form by delicious:days