ROOT CAUSE FAILURE ANALYSIS (RCFA)

ROOT CAUSE FAILURE ANALYSIS (RCFA)

Bandung | 06 – 09 Maret 2017 | Rp 8.500.000/person
Bandung | 04 – 07 April 2017 | Rp 8.500.000/person
Bandung | 02 – 05 Mei 2017 | Rp 8.500.000/person
Bandung | 13 – 16 Juni 2017 | Rp 8.500.000/person

Jadwal Training 2017 Selanjutnya …

 

 

 

TRAINING INTRODUCTION:

Reliability engineering and predictive maintenance have two major objectives: preventing catastrophic failure of critical plant production systems and avoiding deviations from acceptable performance levels that result in personal injury, environmental impact, capacity loss, or poor product quality. Unfortunately, these events will occur no matter how effective the reliability program. Therefore, a viable program must include a process for fully understanding and correcting the root causes that lead to events having an impact on plant performance. The course gives a logical approach to problem solution. The method can be used to accurately define deviations from acceptable performance levels, isolate the root causes of equipment failures, develop cost-effective corrective actions that prevent recurrence. This set is a practical, step-by-step guide for evaluating most recurring and serious incidents that may occur in a plant. The purpose of RCFA & FMEA is to resolve problems that affect plant performance. It should be an attempt to fix blame for the incident. The use of RCFA & FMEA should be carefully scrutinized before undertaking a full investigation because of the high cost associated with performing such an in depth analysis.

 

RCFA TRAINNG MATERIAL OUTLINE:

1. General analysis techniques: FMEA, FTA, CEA, SEA
2. Root cause failures analysis (RCFA) methodology
3. Safety related Issues
4. Regulatory compliance issues
5. Process performance
6. Equipment design evaluation guide
7. Equipment troubleshooting guide
8. Equipments: Pump, Fans, Conveyors, compressors, mixer and agitators, dust collector, process rolls, gearboxes, steam traps, inverter, control valves, seals and packing
9. Six Thinking Hats Approach
10. RCFA Practical
11. RCFA Class Simulation

 

CLASSROOM/DEMONSTRATION/LABORATORY EXERCISE:

1. Study Case
2. Simulation

RCFA TRAINING INSTRUCTOR: 

Ir.Endra Joelianto, Ph.D

Ir.Endra Joelianto, Ph.D. is an expert in control engineering and industrial automation. His outstanding research is: Hybrid Control Systems, Discrete Event Control Systems, Petri Nets Analysis and Application on PLC, Robust and Advanced PID Controller and its implementation on PLC, DCS, Fieldbus, Industrial automation and Advanced Control System Designs. He received first degree (Ir.) in Engineering Physics in 1990 from Department of Engineering Physics, ITB and Doctor of Philosofy (PhD.) in Control Engineering in 2001 from Department of Engineering, The Australian National University, Canberra, Australia.  He is Head of Intelligent Control and Automation Laboratory and Coordinator of PLC Research Group for research and training, Engineering Physics Study Program and Instrumentation and Control Research Division, Institut Teknologi Bandung. He was Director of Schneider-OMRON PLC Training Center, Maranatha Christian University, Bandung.  He has attended several professional training on PLC, DCS and Instruments Callibration, such as: Yokogawa DCS, Bandung (2000), Implementation of Indonesian National Standard (SNI) 19-17025 and Basic Calibration, Yokogawa Electric Corporation, Bandung (2001), Fieldbus Foundation Technology, Singapore (2002), Basic and Advanced PLC Telemecanique-TWIDO, Bandung (2003), Basic and Advanced PLC OMRON, Jakarta (2004), Cleaner Production Application in Industries (Bandung 2005), Effective Energy Systems for Sustainable Development (Thailand 2006), Programming and Networking PLC Mitsubishi (2006), InTouch Wonderware, Wonderware Historian and Information Server (Bandung, 2012). He also has hosted Workshop on Industrial Automation (Bandung, 2002) and (Bandung, 2003), Workshop on Application of PLC in Industrial Automation (Bandung, 2003), National Workshop on Instrumentation & Control (2011) and many professional trainings on PLC, DCS, SCADA, Human Machine Interface and Industrial Process Control and Automation in Bandung. He was the project leader of Department of National Education TPSDP Retooling Program Batch II on Industrial Automation using PLC (2004). He is the chairman of National Student Competition on PLC Programming held regularly since 2007 in ITB. He serves as instructor either for public or for in-house training on instrumentation and process control to universities, industries, petrochemical or oil and gas companies, such as: PT. NGL Arun, PT. NGL Bontang, PT. Pupuk Iskandar Muda, PT. Pupuk Kalimantan Timur, PT. Pupuk Kujang, PT. Semen Padang, PT. Semen Gresik, PT. Semen Cibinong, PT. Indocement, PT. Semen Tigaroda Perkasa, PT. Exspan Nusantara, PERTAMINA, British Petroleoum, Maxus, Gulf, PT. Chevron Geothermal, PT. Chevron Pacific Indonesia,

VENUE :  

Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

TRAINING DURATION

4 days

  JADWAL TRAINING

1. 06 Mar 2017-09 Mar 2017
2. 04 Apr 2017-07 Apr 2017
3. 02 May 2017-05 May 2017
4. 13 Jun 2017-16 Jun 2017
5. 04 Jul 2017-07 Jul 2017
6. 31 Jul 2017-03 Aug 2017
7. 05 Sep 2017-08 Sep 2017
8. 03 Oct 2017-06 Oct 2017
9. 06 Nov 2017-09 Nov 2017
10. 12 Dec 2017-15 Dec 2017

INVESTATION PRICE/PERSON :

1. Rp 8.500.000/person (full fare)  or
2. Rp 8.250.000/person (early bird, payment 1 week before training)  or
3. Rp 7.950.000/person (if there are 3 or more participants from the same company)

 

FACILITIES FOR PARTICIPANTS :

•     Training Module
•     Flashdisk contain training material
•     Certificate
•     NoteBook and Ballpoint
•     T-Shirt
•     Backpack
•     Training Foto
•     Training room with full ac facilities and multimedia
•     Lunch and twice coffee break everyday of RCFA training
•     Qualified Instructor
•     Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me

 

cforms contact form by delicious:days