MAINTENANCE MANAGEMENT ADVANCED – Almost Running

ADVANCED MAINTENANCE MANAGEMENT

Bandung | 22 – 25 April 2019 | Rp 8.500.000/ peserta – ALMOST RUNNING
Bandung | 06 – 09 Mei 2019 | Rp 8.500.000/ peserta 
Bandung | 24 – 27 Juni 2019 | Rp 8.500.000/ peserta 
Bandung | 15 – 18 Juli 2019 | Rp 8.500.000/ peserta 

Jadwal Training 2019 Selanjutnya …

 

 

PENDAHULUAN TRAINING ADVANCED MAINTENANCE MANAGEMENT

Sebagai pilar pertama, yang memusatkan pada masalah logistik dan strategis dengan momentum pada kemajuan moral terutama jajaran manajemen dan staf dalam bentuk gerakan gugs mutu, gerakan zero defect, total productive maintenance, dan sebagainya.

Dengan semakin kompleksnya pekerjaan perawatan, tuntutan kualitas pekerjaan perawatan, tuntutan waktu penyelesaian pekerjaan perawatan untuk menjamin ketersediaan mesin dan peralatan secara optimum pada saat mesin digunakan, kebutuhan informasi yang dapat menunjang pekerjaan perawatan, membantu menciptakan kondisi kerja yang aman dan tertib, metoda evaluasi yang berguna dalam pengawasan perawatan, dan optimisasi ongkos perawatan, sehingga diperlukan manajemen perawatan.

Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Manajemen Perawatan Lanjut.

 

MANFAAT TRAINING ADVANCED MAINTENANCE MANAGEMENT:

Membekali peserta tentang wawasan dan pengetahuan mengelola suatu sistem yang merupakan gabungan antara teknologi perawatan dengan elemen-elemen pemroses informasi tentang perencanaan, disain, proses pembuatan, pengendalian, manajemen, dan operasi untuk tuntutan kualitas pekerjaan perawatan.

Setelah mengikuti pelatihan ini, peserta diharapkan mampu:

• Memahami dan menjelaskan konsep dasar perawatan
• Menjelaskan tingkatan tugas dan fungsi perawatan
• Menjelaskan filosofi supply chain perawatan
• Menjelaskan perencanaan dan penjadwalan perawatan
• Menjelaskan konsep reliabilty centered maintenance
• Menjelaskan konsep total prodcutive maintenance

 

MATERI TRAINING ADVANCED MAINTENANCE MANAGEMENT

1.    Basic and aspect technique of maintenance

• Pengertian, tujuan, dan perkembangan perawatan, kerusakan dan sumber utama kerusakan, pola kerusakan mesin dan pencegahannya, dampak adanya perawatan, dan fungsi teknologi dalam perawatan.

2.    Maintenance management & organization, and implementation

• Pengertian manajemen perawatan, aspek-aspek manajemen perawatan, prosedur perawatan, organisasi kerja bidang perawatan (arti organisasi, struktur organisasi, bentuk-bentuk organisasi, contoh organisasi perawatan).

3.    Maintenance planning

• Definisi dan faktor-faktor penunjang, kendala yang muncul, langkah-langkah penyusunan, dan kebijakan perencanaan perawatan, klasifikasi, persiapan, dan prinsip perencanaan perawatan, tahapan perencanaan pekerjaan perawatan, perencanaan tenaga kerja perawatan, diagram alir pekerjaan perawatan, dan standar perencanaan perawatan.

4.    Inspection activity in maintenance

• Tujuan inspeksi, faktor inspeksi, acuan inspeksi, laporan inspeksi, klasifikasi inpseksi, inspeksi harian, contoh inspeksi.

5.    Computerized of maintenance activity

• Definisi dan faktor-faktor penunjang, kendala yang muncul, langkah-langkah penyusunan, dan kebijakan perencanaan perawatan, klasifikasi, persiapan, dan prinsip perencanaan perawatan, tahapan perencanaan pekerjaan perawatan, perencanaan tenaga kerja perawatan, diagram alir pekerjaan perawatan, dan standar perencanaan perawatan.
• Pengertian, tujuan, dan prinsip dasar penjadwalan, pengelompokkan penjadwalan perawatan, dan dasar penjadwalan pekerjaan perawatan.

6.    Managing spare parts & warehouse

• Manajemen suku cadang: klasifikasi suku cadang, prinsip suku cadang, matrik penyediaan suku cadang, administrasi suku cadang, penentuan kebutuhan suku cadang, persediaan suku cadang,
• Manajemen pergudangan: pergerakan material, pengertian pergudangan dan gudang, fungsi dan tanggung jawab gudang, bentuk dan peran gudang, tugas pergudangan, alasan perlunya manajemen pergudangan, ukuran unjuk kerja pergudangan, prinsip manajemen pergudangan, administrasi pergudangan, perencanaan kapasitas gudang,
• Pengendalian kualitas barang masuk gudang

7.    Procedure to managing budget

• Lingkup biaya perawatan, klasifikasi biaya perawatan, sudut pandang pengurangan biaya perawatan, tindakan pengurangan biaya perawatan, aspek penyusunan biaya perawatan, pertimbangan penyusunan biaya perawatan, estimasi biaya dan penyusunan anggaran perawatan, dan perhitungan biaya perawatan total.

8.    Data collection aspects in maintenance

• The concept TPM, The rule of TPM, The component of TPM and organization for TPM, Maximizing equipment effectiveness, TPM small and group activity, Implementation and Developing TPM.

9.    Concept of predictive maintenance

• The concept TPM, The rule of TPM, The component of TPM and organization for TPM, Maximizing equipment effectiveness, TPM small and group activity, Implementation and Developing TPM.

 

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ?

Para praktisi tingkat operator, tingkat penyelia atau perencana bidang teknologi perawatan mesin pada industri rekayasa.

 

INSTRUKTUR TRAINING ADVANCED MAINTENANCE MANAGEMENT

SUGENG ISDWIYANUDI, Ir. MT. And Team

was graduated from politeknik  universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.: pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System.  In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

 

VENUE

Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

 

TRAINING DURATION

4 days

 

JADWAL TRAINING 2019

• 22 Apr 2019-25 Apr 2019
• 06 Mei 2019-09 Mei 2019
• 24 Jun 2019-27 Jun 2019
• 15 Jul 2019-18 Jul 2019
• 26 Agust 2019-29 Agust 2019
• 23 Sep 2019-26 Sep 2019
• 14 Okt 2019-17 Okt 2019
• 25 Nop 2019-28 Nop 2019
• 09 Des 2019-12 Des 2019

 

INVESTATION PRICE/ PERSON

1. Rp. 8.500.000/ person (full fare) or
2. Rp. 8.250.000/ person (early bird, payment 1 week before training) or
3. Rp. 7.950.000/ person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS

1. Training Module
2. Flash Disk contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. T-Shirt
6. Backpack
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Lunch and twice coffeebreak everyday of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me

 

cforms contact form by delicious:days