WELL SERVICE OPERATION AND WELL TESTING

WELL SERVICE OPERATION AND WELL TESTING

Hotel Santika, Bandung | 27  – 29 November 2013 | IDR 9.750.000,-

SASARAN BELAJAR :
Setelah menyelesaikan kursus ini diharapkan peserta dapat :

• Memahami prinsip-prinsip dasar penyelesaian sumur produksi minyak dan gas bumi (oil and gas well completion) .
• Melakukan diagnosis sederhana dalam menagani problema pada sumur produksi di lapangan yang disebabkan oleh reservoir atau fasilitas produksinya.
• Melakukan perhitungan-perhitungan kuantitatip sederhana untuk sumur-sumur minyak yang diproduksikan dengan cara gas lift, ESP, Hydraulic/Jet Pump, Sucker Rod Pump dan PCP.
• Melakukan perhitungan-perhitungan kuantitatip sederhana untuk perancangan dan perancangan ulang penangan problema kepasiran di sumur produksi.

PRE-REQUISITE :
Latar belakang : Operator/ Sr. Operator/ Jr. Engineer/Non Engineer

MATERI KURSUS :

1. Pendahuluan
2. Penyelesaian sumur (Well Completion)
   • Tipe-tipe penyelesaian sumur
     • Tipe penyelesaian sumur berdasarkan pemasangan pipa selubung
     • Tipe penyelesaian sumur berdasarkan jumlah zona produksi
   • Peralatan bawah tanah
     • Pendahuluan
     • Peralatan produksi bawah sumur
   • Penyelesaian sumur untuk sumur-sumur pengangkatan buatan
     • Sucker Rod Pump (Pompa angguk)
     • Electric Submersible Pump
     • Gas lift
     • Hydraulic Pump
     • Pompa Jet
3. Kerja ulang sumur (Work Over)
   • Faktor-faktor penyebab kehilangan produksi
     • Problem Reservoir
     • Problem mekanikal
   • Perawatan sumur
     • Kerusakan Peralatan
     • Masalah Parafin
     • Pengendapan Scale dan Pengontrolannya
     • Masalah Pasir
     • Kerusakan Formasi
   • Tipe-tipe Pengerjaan Kerja Ulang Sumur
     • Mengubah Zona Produksi
     • Perangsangan Sumur (Well Stimulation)
     • Squeeze Cementing
   • Peralatan Kerja Ulang
     • Menara (Rig) Konvensional
     • Unit Wireline
     • Gulungan Tubing Tanpa Sambungan (Endless Tubing Coil)
     • Unit Snubbing
4. • Sand Control Technology
   • Sand Control Concept
     • Reason for Sand Control
     • Determining Need for Sand Control
     • Selecting Type of Control
     • Proper Drilling and Completion
   • Gravel and Screen Selection
     • Slot and Gravel Size Design
     • Slotted Liners
     • Screens
     • Prerpacks
   • Inside Gravel Packing
     • Perforation Packing
     •  Two Stages Methods
     • Use of Viscous Carrying Fluid
     • Downhole Equipment
     • Type of Operation
     • Sigle Stage Methods
   • Open Hole Gravel Packing
     • Conventional Methods
     • Special Tools and Operations
     • Zone Isolation Methods
     • Model Study Result
     • Deviated Well Problem and Solutions
   • Consolidation
     • Formation Consolidation
     • Consolidation System Features
     • Well Preparation and Design Factor
     • Consolidated Packs
     • Water Base Systems
     • Thermosetting Gravel Packs
   • Stable Arc Sand Control
     • The Stable Concept
     • Applying Stress for Sand Control
     • Conventional Cementing Limitations
     • Downhole Equipment
     • Type of Operation
5. Pressure Drawdown Test
   • ? Analisis Pressure Drawdown Pada Periode Transien
   • ? Analisis Pressure Drawdown Pada Periode Transien Lanjut
   • ? Analisis Pressure Drawdown Pada Periode Semi-Steady State
6. Pressure Buildup Test
   • ? Prinsip Superposisi
   • ? Pressure Buildup Ideal
   • ? Actual Buildup Case
   • ? Lamanya Pengaruh Wellbore Storage
   • ? Penentuan Tekanan Rata-Rata
   • ? Pressure Buildup Untuk Sistem Lebih Dari Satu Fasa
   • ? Analisis Pressure Buildup Dibawah Pengaruh Redistribusi Fasa Pada Lubang Bor
7. Multi Rate Test
   • ? Persamaan Dasar Untuk Multiple Rate Test
   • ? Two Rate Flow Test
   • ? Deliverability Test
   • ? Variable Injection Rate Test
8. Multiple Well Test
   • ? Interference Test
   • ? Interference Test Pada Reservoir Terbatas (Bounded)
   • ? Pulse Testing
   • ? Analisis Pulse Test Dengan Metode Stegemeier
9. Analisis Tes Sumur Dengan Menggunakan Type Curve
   • ? Prinsip Analisis Type Curve
   • ? Ramey’s Type Curve dan McKinley Type Curve
10. Tes Sumur Sumur Gas
    • ? Sifat-Sifat Gas
    • ? Analisis Tes Sumur Pada Sumur Gas
11. Injection Well Testing
    • ? Injectivity Analysis
    • ? Falloff Test Analysis
    • ? Step-Rate Testing
12. Drill Stem Testing
    • ? Analisis DST

INSTRUKTUR :
Dr.Ir. Sudjati Rachmat, DEA

DR. IR. SUDJATI RACHMAT, DEA was graduated from Petroleum Engineering Department of ITB in 1979 and hold Doctorate Degree with honored in 1987 from Ecole Centrale de Lyon I, France. The topic of his thesis is Modelisation Numerique d’Ecoulements Polyphasiques en Milieux Poreux Application au Cas de Calcul des Champs de Pressions et de Saturations dans un Gisement de Petrole.
For the time being, he became a lecturer in Petroleum Engineering Department of ITB. His subjects are Analysis and Numerical Method, Engineering Mathematics, Computer Simulation, Fluid Mechanic, Artificial Intelligence for Petroleum Engineering.
He also gave many courses to the community, such as: basic reservoir engineering and reservoir simulation, basic production engineering, down hole well testing, statistic and numerical method for petroleum engineering, basic log interpretation, etc. He is a member of some profession organization such as: IATMI, SPE/EIME, IMA, HAIAI, FPS-USA,

ASISTEN :  Ir. Radintya Danas, MT

VANUE AND DATE

Vanue : Hotel Santika Bandung
Date

• 27-29 November 2013

FACILITIES

• Training Kit
• Soft Copy Material Training On Flashdisk 4GB.
• Coffee Break & Lunch
• Certifikat
• Souvenir
• Additional Program (optional)

INVESTATION

• IDR 9.750.000,- /Participant Non residential.
• For send 3 participant from the same company IDR. 8.250.000,-/participant.

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me

 

cforms contact form by delicious:days