SCADA (SUPERVISORY CONTROL AND DATA ACQUISITION)

SCADA (SUPERVISORY CONTROL AND DATA ACQUISITION): PRINCIPLES, HARDWARE SYSTEM, OPERATION & PROGRAMMING

Bandung | 25 – 28 Agustus 2014 | Rp 7.950.000/person
Bandung | 15 – 18 September 2014 | Rp 7.950.000/person
Bandung | 13 – 16 Oktober 2014 | Rp 7.950.000/person
Bandung | 17 – 20 November 2014 | Rp 7.950.000/person
Bandung | 08 – 11 Desember 2014 | Rp 7.950.000/person

INTRODUCTION:

SCADA has traditionally meant a window into the process of a plant and / or a method of gathering of data from devices in the field. Today, the focus is on integrating this process data into the actual business, and using it in real time. In addition to this, today’s emphasis is on using Open Standards, such as communication protocols (eg IEC 60870, DNP3 and TCP/IP) and ‘off-the-shelf’ hardware and software, as well as focusing on keeping the costs down. PLCs continue to gain in popularity. In fact, many SCADA applications use PLCs as the RTU of choice, when communicating with field devices. This comprehensive course covers the essentials of SCADA and PLC systems, which are often used in close association with each other.

TRAINING OBJECTIVE

After completing this course, the participants should be able to understand the concepts of SCADA Systems, build and configure the MTU and RTU modules, program the MTU and RTU, use sequential and PID controller implementation of MTU and RTU. Input/Output communication to get RTU data, set up polling and exception report of MTU/RTU, link the TU/RTU with Supervisory Computer and use Human Machine Interface (HMI) to optimize the operation of SCADA System.

SCADA MATERIAL OUTLINE:

1. Concept of SCADA System
2. Software and Hardware of SCADA System
3. MTU/RTU Configuration Set-up
4. MTU/RTU Communication
5. MTU/RTU Ladder Logic Programming
6. Logic and Sequential Programming
7. MTU/RTU PID controller Programming
8. MTU/RTU Data Logging
9. MTU/RTU Exception Reporting
10. MTU/RTU System Redundancy
11. Input/Output Server and HMI System
12. HMI Operation and Programming
13. Comprehensive Practice

TRAINING METHODES:

• Tutorial
• Discussion
• Practice

FACILITIES USED:

1. PLC
2. Software and Hardware of SCADA System
3. Miniature Plan
4. HMI Panel
5. MTU/RTU

INSTRUCTOR :

H. MH Sapto Widodo, M.Sc. and Hadi Prasetyo, MT

H. MH Sapto Widodo, M.Sc was born in June 9th 1957. He got his education of master of science in electrical engineering, System Design and Technology, Fachhochschule Darmstadt, Germany. He also has followed some courses for improving his competencies in Indonesia and abroad. He is head of electrical department at P4TK BMTI Bandung atau TEDC Bandung(technical education development  center) and he also as lecturer at the department. He has experiences in some consultants. Some training sectors related to his fields are as follows Electrical & Mechatronic, including these related fields: Electrical

VENUE :

Hotel Kagum Group Bandung
(Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :

4 days

 

TRAINING TIME

1. 20 – 23 Januari 2014
2. 17 – 20 Februari 2014
3. 17 – 20 Maret 2014
4. 14 – 17 April 2014
5. 19 – 22 Mei 2014
6. 16 – 19 Juni 2014
7. 7 – 10 Juli 2014
8. 25 – 28 Agustus 2014
9. 15 – 18 September 2014
10. 13 – 16 Oktober 2014
11. 17 – 20 November 2014
12. 8 – 11 Desember 2014

INVESTATION PRICE/PERSON 

1. Rp 8.500.000/person (full fare)  or
2.  Rp 8.250.000/person (early bird, payment 1 week before training)  or
3. Rp 7.950.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

1. SCADA Training Module
2. Flashdisk contain training material
3. Certificate
4. NoteBook and Ballpoint
5. T-Shirt
6. Backpack
7. Training Foto
8. Training room with full ac facilities and multimedia
9. Lunch and twice coffee break everyday of SCADA training
10. Qualified Instructor
11. Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me

 

cforms contact form by delicious:days