SURFACE PRODUCTION OPERATION & EQUIPMENT

SURFACE PRODUCTION OPERATION & EQUIPMENT
Bandung | 25 – 28 August 2015 | Rp 8.950.000/person
Bandung | 28 September – 01 October 2015 | Rp 8.950.000/person
Bandung | 06 – 09 October 2015 | Rp 8.950.000/person
Bandung | 23 – 26 November 2015 | Rp 8.950.000/person
Bandung | 08 – 11 December 2015 | Rp 8.950.000/person

OBJECTIVES :

After completion of this course, the participants will be able and capable to :

1. Understand the basic concept of oil and gas handling processes and facilities, and how to operate this technology in field application.
2. Diagnostic of oil and gas reservoir performance under actual drive mecanism and future performance with current handling processes.
3. Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
4. Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil and gas handling processes.

AUDIENCE/PARTICIPANTS :
No specified  (Operator/Sr. Operator/Engineer or Non Engineer)

TRAINING MATERIAL OUTLINE :

1.    Gas Surface Production Operation and Equipments

• a.    Introduction to Gas Handling and Facilities
• b.    Gas Properties
  • Ideal gas
  • Real Gas
  • Gas Formation Volume Factor
  • Gas Compressibility
  • Gas-Water System
  • Gas-Condensate System
• c.    Gas Reservioir Performance
  • Reservoir Gas Flow
  • Gas Reserves
  • Well Completion Effect
  • Tight Gas Well
  • Gas Well Testing
• d.    Gas Piping System
  • Basic  Flow Equation
  • Flow in Wells and Flow in Pipelines
  • Effect of Liquids
  • Use of Pressure Traverse Curve
  • Liquid Removal from Gas Wells
• e.    Gas Compression
  • Type of Compressors
  • Compressor Design
  • Centrifugal Compressor
• f.    Total System Analysis
  • Tubing and Flow Line Effect
  • Separator Pressure Effect
  • Compressor Selection
• g.    Flow Measuring
  • Orifice Metering
  • Metering System Design
  • Other Metering Methods
• h.    Gas Condensate Reservoir
  • Well Testing and Sampling
  • Gas Cycling
• i.    Field Operation Problems
  • Pressure Cumulative Production Plot
  • Hydrate Formation
  • Sour Gas Production
  • Corrosion Control With Inhibitors
  •  Sulfur Deposition
• j.    Gas Processing
  • Field treatment of Natural Gas
  • Gas Plant Operation
  • Gas Dehydration
  • Gas Sweetening

2.    Oil Surface Production Operation and Equipments

• a.    Oil Well Surface Production Equipment and Operation
  • Oil Well Equipment
  • Oil Well Production Operation
  • Well Automatic Safety Device
• b.    Oil Gathering System. Manifold and Flowline
  • Oil Gath ring System
  • Manifold e System
  • Flowline Sizing and Design
• c.    Crude Oil and Gas Separation
  • Separator and Principle of Separation
  • Design of Separator
  • Oil Dehydration
• d.    Principles of Measurement
  • Introduction to Measurement
  • Crude Oil Measurement
  • Gas Measurement
• e.     Well Test
  • Introduction
  • Responsibility for Test
  • Preparation for Test
  • Types of Well Test
  • Equipment and Procedures
  •  Accuracy of Fluid Measurement
  • Problem in Testing
  • Type of Test
• f.    Artificial Lift Method
  • Gas Lift
  • Submersible Pump
  • Succker Rod Pump
  • Hydraulic Pump

3.    Cases study and discussion

INSTRUKTUR TRAINING

Dr.Ir. Sudjati Rachmat, DEA. and Team

Dr.Ir. Sudjati Rachmat, DEA. adalah dosen di jurusan perminyakan ITB sejak tahun 1979 sampai sekarang. Beliau alumnus dari ITB lulus tahun 1977, kemudian melanjutkan pendidikannya di Diplome d’Etude Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Dan pada tahun 1985 – 1987 beliau mengambil program Docteur en Mecanique de Fluide (Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE.

Dr. Sudjati Rachmat sering menjadi instruktur dalam banyak pelatihan yang berkaitan dengan perminyakan untuk perusahaan di seluruh Indonesia, diantaranya seperti Pertamina, Chevron, Badak LNG, Total, Vico, Mobil Oil Indonesia, Ministery of Mining and Energy, Unocal Indonesia, Lemigas, IATMI-IWPL Migas, PPTM Migas, PT Caltex Pacific Indonesia, Gulf, Arco, dll.

Topik-topik training yang Beliau sampaikan diantaranya adalah production surface and down hole equipment, Basic Reservoir Engineering, Sucker Rod Pumping Theory and Practice, Production Logging Engineering, Nodal Analysis and Production Optimization, Well Test, Operation and Interpretation, Well Design, Completion and Workover, Numerical and Statistical Method for Petroleum Engineering Problems, Oil-Well Stimulation, Hydraulic Fracturing, Statistics for Petroleum Engineering, Reservoir Simulation for Enhanced Oil Recovery, Applied Reservoir Engineering and Reservoir Simulation, Aspects of Horizontal Well Technology, Geology and Geophysics Modeling, Advanced Programming on Numerical Analysis and Industrial Information System, Management Information System, Well Stimulation of Oil and Gas Reservoir, Horizontal Well Technology, Transportation of Oil and Gas, Sand Control Technology, dan lain-lain.

Beliau banyak melakukan penelitian di bidang MIGAS dan telah mempublikasikan dan menseminarkannya di forum dunia.

VENUE :

Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :

4 days

 

TRAINING TIME

8. 25 Aug 2015-28 Aug 2015
9. 28 Sep 2015-01 Oct 2015
10. 06 Oct 2015-09 Oct 2015
11. 23 Nov 2015-26 Nov 2015
12. 08 Dec 2015-11 Dec 2015

 

INVESTATION PRICE/PERSON :

1. Rp. 8.950.000/person (full fare) or
2. Rp. 8.750.000/person (early bird, payment 1 week before training) or
3. Rp. 8.500.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS:

1. Training Module
2. Flash Disk contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. T-Shirt
6. Backpack
7. Training Photo
8. Training room with Full AC facilities and multimedia
9. Lunch and twice coffeebreak every day of training
10. Qualified Instructor
11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me

 

cforms contact form by delicious:days