Electric Power System Protection

Electric Power System Protection – YOGYAKARTA

Wisma MM UGM, Yogyakarta | 24-26 Januari 2012 | IDR 5.000.000,-
Wisma MM UGM, Yogyakarta | 14-16 Februari 2012 | IDR 5.000.000,

DESKRIPSI

Construction of generation plants, transmission and distribution of electrical energy systems is a costly business. At both levels of national grid systems and local industrial plants, two important aspects are at the heart of this strategic industry. These are the reliability of energy delivery to meet customers’ demands and safe operation. At different stages of energy processing i.e. at the generation, transmission and energy delivery stage, protection of personnel and equipment is of prime importance. To achieve these goals, protection schemes are to be employed. The philosophy adopted in any protection scheme is to clear faults with a minimum system disruption, at a high speed, and in a simple and economical way. The course deals with different types of protection schemes used in large networks and those adopted in industrial plants. It describes some of the important components such as relays, comparators and other protective gears, and techniques and calculations used for their settings. The course also reflects on recent development and what are new in this important field of electricity industry.

On organizational level

• It introduces the subject of protection as an art where technical and economical constraints are to be met and compromised to achieve certain engineering requirements.
• Learn to develop and manage well-protected plants that lead to a higher security, less outages and hence better profitability.
• The course introduces new technologies used in relaying systems such as microprocessor and computer relaying which put organizations at the forefront of modern electricity industries.
• Helps organizations in making appropriate decisions at times of system expansion or in situations where new developments become necessary.
• Help organizations to understand causes of system failures, means available for remedies and hence better system management and operation with minimum investment.

Personal Impact

• Introduces and acquaints attendees with different components used in protection schemes.
• Ability to perform some basic essential calculations required for relay settings.
• Establishes confidence in dealing with protection schemes installed for protecting personnel equipment to grantee flow of energy.
• Learn how to assess protection performance.
• Add knowledge on how to improve security level by designing better protection systems with aim to improve performance.
• Learn about error sources introduced by some protection scheme components and how to overcome them.

OUTLINE

Fundamentals of Protection Practice and Basic Technology

• Protective Gear.
• Reliability
• Selectivity
• Speed, Stability and Sensitivity
• Circuit quantities & conventions
• Fault calculations

CTs Requirements

• Error in CTs and compensation
• Accuracy limit current of CTs
• Class X CTs and linear CTs
• Transients in CTs
• Practical conditions

Static Relays

• Circuits using analogue techniques
• Digital techniques
• Output and Tripping circuits
• Electrical Interference
• Future trends

Protection Schemes and substation design diagrams

• Generator protection
• Motor protection
• Transformer protection
• Line Protection
• Substation Design Diagrams

Differential protection

• Classification of differential protection
• Direction comparison
• Circulating current and balanced voltage systems
• Transformer differential protection
• Differential protection for generators and rotating machines
• Line differential protection
• Busbar-differential protection
• Differential system with multiple restraint
• High impedance differential system

Industrial Power System Protection

• Busbar arrangement
• Discrimination
• HRC fuses
• Industrial circuit-breakers
• Infeed fault current from induction motor
• Automatic changeover systems
• Voltage and phase reversal protection
• Private generation

Installation, testing and maintenance of protection systems

• Installation of protection equipment
• Testing protection schemes.
• Pre-commissioning tests,
• Installation resistance measurements
• Secondary injection tests
• C.Ts tests
• Periodic maintenance
• Setting and testing numerical protection

PARTICIPANTS

Managers involved with energy management, Electrical engineers and Technical Staff who have to deal with the aspect of electrical and industrial power system protection, control and operation

METHOD

Lecturing, workshop, konsultasi interaktif, dan praktek MC

INSTRUKTUR

Tugino, ST MT

WAKTU

• 24-26 Januari 2012
• 14-16 Februari 2012

TEMPAT

Wisma MM UGM, Yogyakarta

INVESTATION FEE

• IDR  5.000.000 per participant – non residential

FACILITIES

• Training module (hard & softcopy)
• Training kit (bag or backpack, notes, ballpoint)
• 2x coffee break, 1x lunch
• T-shirt
• Certificate
• Training Photo
• Picking-up service from Airport/Railway station to hotel (for at least 2 participants from the same company)

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me

 

cforms contact form by delicious:days